Picture
Product video

6-CHANNEL CLASS D AMPLIFIER WITH 8-CHANNELL DSP · 630 WATTS RMS

It is barely imaginable that a fully grown class D amplifier works in this small housing, featuring six pairwise bridgeable outputs, each with 105 watts RMS per channel (at 2 Ω). A total of 630 Watts RMS are available.

The compact dimensions are made possible by an elaborate 4-fold laminated board, which also effectively suppresses EMC interference due to the favorable topology - a must, especially for full-range Class D amplifiers.

Test Review
Features Technology Specifications Download Related products
Features

Intelligent High Level Input (Error Protection System)

Start-Stop ready, Auto Turn-On

Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452)

32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App

Soft-Clipping (power attenuation) in 2 Ohm operation

Signal-to-noise Ratio ≥90dB

Frequency Response 15 Hz – 22 kHz (-3dB)

THD ≤0,1% (1 kHz, 4Ω, 90% Power)

Separately controllable input sensitivity (Channel 1-4, Channel 5-6, AUX), Clipping LEDs

Plug+Play with vehicle-specific cable sets

External Bluetooth® USB-Dongles BTS, BTS-HD & BTA2 for Audio Streaming & App Control (optional)

Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)

Technology

Every channel pair can be bridged. Bridging amplifier channels to more than double the power.

EPS technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory.

The amplifier can handle frequent power cycling from vehicles’ automatic start-stop systems, ensuring consistent sound quality even when the engine turns on and off repeatedly.

This feature eliminates the need for a separate remote turn-on wire, simplifying the installation process. It ensures that the amplifier is ready to operate whenever the audio system is in use.

Specifications

Power output(RMS) @ 13.8 VDC, 1% THD:

6 x 70/105 Watts RMS @ 4/2 Ohms or

3 x 210 Watts RMS @ 4 Ohms bridged

6 x High Level Input 8 – 20 V RMS

6 x RCA Low Level Input* (RCA) 2 – 6 V RMS

1 x AUX Input/Stereo (RCA) 2 – 6 V RMS

1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit)

6 x Loudspeaker Output amplified

2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP)

Dimensions: 150 x 44 x 220 mm

* only with optional MPK-RCA6/MPK-RCA6-PP cable set

Related products
Copyright © 2023 Musway. All Rights Reserved.